2-Part, 100% Solids, Moisture & pH Barrier
MOISTURE VAPOR BARRIER is a two component, 100% solids, solvent free epoxy primer designed for superior moisture vapor transmission control. It is capable of reducing the hydrostatic pressure emitted by concrete from 15 lbs./1000 square feet to less than 1 lb.( <0.05perms). The presence of high moisture vapor emissions in concrete substrates should not exceed 3.0/lbs. of moisture per 1000 sq./ft. area within 24 hours, otherwise, it will adversely affect the adhesion of most conventional floor coverings and coatings.
The MOISTURE VAPOR BARRIER can eliminate the risk of coating failure due to high moisture vapor emissions. It is suitable for concrete and a variety floor coverings such as vinyl, tiles, sheeting, carpet, hardwood, and as a primer for urethanes, epoxies and traffic membranes. It is an ideal primer for damp areas, high moisture emitting surfaces and for below grade applications.
COVERAGE RATES:
Theoretical Square Feet Per Gallon is totally dependent on substrate texture and condition as well as the moister vapor transmission levels. Recommended Coverage Rate to suppress moisture vapor transmission of 12-16 pounds: 100 square feet per gallon.
TYPICAL AREAS OF APPLICATION:
Concrete Slabs On-Grade or Below-Grade such as:
PACKAGING:
2:1 Mixing Ratio:
#2125-03 3 Gallon Kit: 2 Gallon Part A : 1 Gallon Part B
#2125-96OZ: 96-Ounce Kit: 64 Ounce Part A : 32 Ounce Part B
