|
Grounds Maintenance
SPECIALTY PRODUCTS
FERTILIZERS
HERBICIDES
SPECIALTY PRODUCTS
| “MUNICIPAL & UTILITY INVERTED TIP MARKING PAINT” |
Environmentally Formulated- Water Based
VOC Compliant
Can be used for handheld applications or with our “Long Wand”
Available in many colors including: Safety Red, Utility Yellow, Fluorescent Yellow, Fluorescent Blue, Fluorescent Red/Orange, Fluorescent Pink, Fluorescent Green
Use indoors or outdoors to mark hazards, construction areas, survey markings, underground utility lines, playing fields, pavement, steps, plumbing, etc.
Spray on asphalt, concrete, or other paved surfaces, or on dirt, grass or gravel.
|
|
|
#A4194
|
| ANTI-DESICCANT FOLIAGE |
| HOLDS MOISTURE IN GRASS AND ORNAMENTAL SPRAY PLANTINGS - STOPS SUMMER SCALD, TRANSPLANT SHOCK, & WINTER BURN |
Helps plants retain moisture with a breathing membrane
with a very thin polymer film that allows oxygen and carbon dioxide to pass through, yet holds in valuable moisture to prolong plant life under stress conditions.
Dilute 1 part ANTI-DESICCANT with 2 parts water. Spray to cover foliage, stems, and terminal shoots of evergreens, conifers, roses, magnolia, dogwood, and broadleaf plants.
ANTI-DESICCANT may also be used as a sticking agent and extender for insecticide application. Add 1 to 2 quart per 100 gallons of spray solution.
|
| |
|
#105
|
| AGRICULTURAL MARKING |
| 80:l DILUTION RATIO FOAM - HIGH OR LOW PRESSURE - HARD OR SOFT WATER |
| This synthetic, non-protein foam concentrate produces thick foam with exceptional stability for long life under extreme field conditions of heat, cold, sunlight, and dry soil. High dilution rate gives maximum economy and ease of use under all water conditions while assuring uniform application of agricultural chemicals.
AGRICULTURAL MARKING FOAM is designed to be diluted at an 80:1 ratio. Concentration may be adjusted for severe conditions. In soft water conditions, AGRICULTURAL MARKING FOAM may be used at dilutions up to 100:1. |
| |
|
#113
|
| ORGANIC SOIL CONDITIONER |
| ANIONIC CONDITIONER WITH CHELATED IRON |
This organic soil conditioner is a premium quality wetting and penetrating agent for use on lawns, athletic fields, golf courses, and ornamental turf. It is designed to eliminate dry spots
caused by compaction, clay content, thatch or fire scars. It promotes faster, deeper penetration of air and water into the soil to stimulate growth of larger and stronger root systems. Increased penetration and retention of moisture reduces irrigation requirements, and makes soil nutrients more available to plants. It also encourages microbial action to digest clippings and thatch, and contains chelated iron for quick greening.
Light applications on golf greens prevent dew formation. Seeded areas treated with this product are more resistant to wilt, require less watering, have less run-off, and less evaporation.
This product can be mixed with liquid fertilizers, herbicides, or micronutrients for a single, convenient application. |
| |
|
#390
|
| SURFACTANT |
| INCREASES EFFECTIVENESS OF AGRICULTURAL CHEMICALS |
| SURFACTANT is a specially formulated spreading and wetting aid developed to increase the effectiveness of water based agricultural chemical sprays. SURFACTANT reduces the surface tension of fertilizer and pesticide solutions and allows them to penetrate into soil quickly, for less run-off and waste. The wetting and sticking action of SURFACTANT also assures even and thorough coverage of foliage and reduced wash-off of expensive chemicals.
Add 1 gallon per 1000 gallons of mixed spray solution, or follow manufacturer’s recommendations from the chemical product label.
This product may also be labeled as a NON-IONIC TURF CONDITIONER. Apply at the rate of 1 quart per 1000 square feet, diluted with sufficient water for uniform application, or use a proportioning siphon for application through irrigation system or hose end sprayer. |
| |
|
#395
|
| CHEMICAL WATER SOFTENER |
| IMPROVES HARD WATER PERFORMANCE |
| CHEMICAL WATER SOFTENER sequesters hardness and interfering metal ions in water. This allows complete miscibility and superior performance from marking foams, fertilizers, herbicides, insecticides, and fungicides. It promotes more efficient use of all agricultural chemicals, and produces maximum foaming action in marking systems.
For water with high hardness (greater than 600 ppm or 35 grains per gallon), use 1 gallon of softener for each 50 gallons of water. For water of lower hardness, decrease the amount of softener used. |
| |
|
#712
|
FERTILIZERS
| CHELATED IRON |
| CURES AND PREVENTS IRON DEFICIENCY IN THE SOIL |
| This concentrated supplement provides the necessary nutrient to prevent or cure iron deficiency in turf, ornamental shrubs, and trees. iron deficiency appears as a pale green to yellow colored foliage on turf, trees and shrubs. This condition is caused by the lack of iron in the soil or the iron present in the soil being bound and unavailable to the plant. This product provides iron in a form that is immediately available to plants, and remains in the soil for extended feeding of plants. It is compatible in tank mixes with fertilizers and penetrating aids, and with some herbicides, insecticides, and fungicides.
To treat turf areas, use 5 to 10 gallons of CHELATED IRON in sufficient water to cover one acre. For trees and ornamentals, use 4 ounces of CHELATED IRON per inch of trunk diameter. For foliar feeding trees and shrubs, mix 1 gallon in 64 gallons of water. |
| |
|
#133
|
| LIQUID FERTILIZER |
HIGH ANALYSIS - SPECIAL PURPOSE FORMULA
5-15-10 — FOR NEWLY SEED AREAS OR LATE SEASON APPLICATION |
| 5-15-10 is a special application formula developed to stimulate root growth faster and deeper than in untreated areas. The high phosphorus content toughens and promotes stronger growth of the small, hairlike feeder roots of newly seeded areas, plants, shrubs, ornamentals and nursery stock. Extra potassium encourages proper stalk development, and low nitrogen does not burn or promote excessive top growth.
For late season application or newly seed areas, use 1 gallon of 5-15-10 in sufficient water for uniform application to 3000 square feet. This fertilizer is also the best choice for use on shrubs, trees, ornamentals, nursery stock, and vegetable gardens. |
| |
|
#230
|
| LIQUID FERTILIZER |
MOST COST EFFECTIVE GENERAL PURPOSE FERTILIZER
16-8-4 — HIGH NITROGEN FOR SPRING AND SUMMER APPLICATION |
| This concentrated liquid fertilizer provide the correct N-P-K ratio to start vigorous growth in the spring and sustain healthy development throughout the summer months.
For turf areas, dilute 1 gallon of 16-8-4 with sufficient water for even application over 3000 square feet. Repeat application as required to apply 4 to 6 pounds of nitrogen per 1000 square feet of turf over the course of the growing season. Make first application just prior to spring greening.
For trees and shrubbery, mix 1 pint of 16-8-4 in 1 5 gallons of water and spray on foliage to the point of run-off. For root feeding, use 4 ounces of fertilizer per inch of trunk diameter Dilute with 5 to 10 gallons of water and pour onto root zone. |
| |
|
#245
|
| LIQUID FERTILIZER |
PREMIUM GRADE PRIMARY FERTILIZER
20-2-3 — WITH CONTROLLED RELEASE NITROGEN |
| This concentrated formula is scientifically blended with a special CONTROLLED RELEASE NITROGEN for longer lasting, more even distribution of this vital nutrient - without any burning of the grass! It is recommended for all varieties of lawn grass. 20-2-3 LIQUID FERTILIZER promotes lush top growth and fast greening - gives new life and color to lawns. For spring application to turf, dilute 1/2 to 1 gallon in sufficient water for uniform application to 1000 square feet. For later applications, use 1/2 to 1 gallon of fertilizer for application to 2000 square feet. Turf should be watered thoroughly after application to wash nutrients into the soil. |
| |
|
#242
|
| WATER SOLUBLE ECONOMICAL POWDER FOR LIQUID SPRAY FERTILIZER POWDER |
| HIGH NITROGEN FORMULA FOR QUICK GREENING |
| This dry fertilizer powder offers all the advantages of liquid fertilizers - while saving on transportation costs and handling expenses. This fertilizer dissolves quickly and completely for liquid application, but does not require special storage facilities like some liquid products because it’s a powder. Because it is applied as a liquid, the nutrients penetrate quickly and can be used immediately as food for the plant. This balanced formula is ideal for use from spring through summer. Application of this product is easy. Just mix 120 pounds of fertilizer in 250 - 300 gallons of water to cover one acre. This rate will provide 1 pound of nitrogen per 1000 square feet of turf. |
| |
|
#228
|
HERBICIDES
| DOOM 2,4-D SOLVENT BASE WEED KILLER |
DOOM is an EPA registered solvent based weed killer. It is a combination of 2,4-D and Bromacil. This combination insures rapid top kill and will prevent future growth of all weeds up to 1 year. A great product for industrial plants, loading docks, parking lots, fence rows, storage yards, tank farms, railroad sidings, homes, and buildings.
Available in 20 oz. aerosol cans
|
| |
|
#452
|
| CONKILL |
| AQUATIC WEED AND ALGAE KILLER |
| Type: Non-selective contact herbicide - no residual action. Water dilutable concentrate with 1.85% Diquat.
CONKILL has label directions for use in controlling aquatic plants in lakes, ponds, and drainage ditches, including algae, pondweed, bladderwort, elodea, coontail, and watermilfoil. Application is made by pouring or spraying the product over the water surface, or injecting below the surface.
This product label also carries directions for use on terrestrial weeds at a dilution of 2 1/2 gallons per 20 gallons of water.
|
| |
|
#145
|
| CONTACT HERBICIDE #1 |
| DIQUAT CONCENTRATE FOR TERRESTRIAL USES |
| Type: Non-selective contact herbicide - no residual action. Water dilutable concentrate with 1.85% Diquat. This contact herbicide is called the Chemical Edger. It effectively controls broadleaf weeds, brush and grasses around golf courses, driveways and parking lots, industrial sites, and other non-crop areas. It kills most every type of plant life on contact - but it kills through the leaves only, and will not injure desirable plants as long as the spray does not contact the leaves of these plants.
It becomes inactive on contact with soil, and is not absorbed through roots.
Because this herbicide has no residual action, it will not prevent seeds from sprouting or new growth from occurring. This make it ideal for spot weed control in lawns, around trees, and under shrubs, too.
Use 2 1/2 gallon per 20 gallons of water (1 6 ounces per gallon of water). Apply as a directed spray to thoroughly wet the weeds. Application may be made at any time of the growing season, and must be repeated as necessary. |
| |
|
#145
|
| NON-SELECTIVE HERBICIDE #1 |
| FOR YEAR LONG RESIDUAL CONTROL |
| Type: Non-selective, total kill herbicide, with residual control to prevent regrowth. Ready to use. Contains 0.617 Bromacil along with 2,4-D low volatile ester.
For long lasting total control of all vegetation on non-cropland areas. This product kills ALL vegetation, and leaves bare ground in areas such as railroad rights-of-way, fence rows, parking lots, around buildings, loading ramps, storage yards, tank farms, and industrial sites. The degree of control and duration of results depends on the amount of herbicide applied, soil type, rainfall and other conditions.
Apply 43.5 gallons of undiluted weed killer per acre, after the most predominant weeds have emerged. |
| |
|
#315
|
| NON-SELECTIVE HERBICIDE #2 |
| MOST POWERFUL - LONGEST LASTING |
| Type: Non-selective, total kill herbicide, with residual action to prevent regrowth. Ready to use- Contains 0.98% Bromacil for longer control, along with 1.09% of a low volatile ester of 2,4-D.
Similar to Non-Selective Herbicide #1, but with 50% more Bromacil for the longest lasting residual control available. Use it on non-crop areas to kill all weeds and prevent regrowth for one or more seasons. Our most potent herbicide of this type, the low volatile 2,4-D ester assures fast knockdown of tough perennial weeds - without any hazard to nearby vegetation. Use 1 to 2 gallons per 1000 square feet (40 to 80 gallons per acre). Variable application rates allow the user to apply up to 5 gallons per 1000 square feet for multi-season weed control along fence rows, parking lots, around buildings, loading ramps, storage yards, tank farms, along pipelines, industrial plant sites and similar areas where grasses and weeds interfere with drainage, create a fire hazard or cause unsightly appearance. |
| |
|
#320
|
| NON-SELECTIVE HERBICIDE #3 |
| EMULSIFIABLE CONCENTRATE WITH PROMETON |
| Type: Non-selective, total kill herbicide, with residual action to prevent regrowth. Emulsifiable concentrate. Contains 3.73% Prometon.
Designed for non-selective residual control of all weeds and grasses on non-cropland areas such as parking lots, fence rows, railroad sidings, drainage ditch banks, storage yards, around buildings or industrial sites. Mix one gallon of this herbicide with ten gallons of water, and apply uniformly over 1,000 square feet of soil surface. For control of hard-to-kill perennial weeds and grasses such as johnsongrass, bindweed, and wild carrot, use 3 to 41/2 gallons of this herbicide mixed with 10 gallons of water per 1,000 square feet. |
| |
|
#322
|
| PROMETON 12.5% HERBICIDE CONCENTRATE |
| HIGHLY DILUTABLE - NON-SELECTIVE |
| Type: Non-selective, total kill herbicide with residual action to prevent regrowth. Emulsifiable concentrate. Contains 12.5% Prometon.
Designed for use around buildings, storage areas, industrial sites, fences, drainage ditch banks, recreational areas, roadways, rights-of-way, railroads, pipelines, lumberyards, tanks, or similar areas - wherever complete control of vegetation is desired. For maximum economy and ease of application, mix with water or oil. For fastest kill, water lightly to wash the weed killer into the root zone. For most weeds, use 10 to 15 gallons diluted with 50 to 100 gallons of water to cover an acre. This will kill all plant growth for a year or more (2 to 3 pints in 3 to 5 gallons water to cover 1000 square feet). For tougher weeds, use 40 to 60 gallons per acre. For fast top kill, dilute with diesel oil or fuel oil. |
| |
|
#324
|
| GRANULAR WEED CONTROL |
| CONVENIENT TOTAL KILL HERBICIDE |
| Type: Non-selective total kill herbicide with residual action to prevent regrowth. Ready-to-use granular formulation. Contains 4% Bromacil.
GRANULAR WEED CONTROL is a convenient, easy-to-apply herbicide that provides excellent, long-lasting control of annual and perennial weeds and grasses. This high strength product contains a high percentage of Bromacil for multi-season weed control on non-cropland areas. The duration of non-productivity is dependent upon rainfall, type of soil and other conditions. Apply using a fertilizer type spreader (or shaker type applicator for small areas) at the rate of 200 to 400 pounds per acre (0.5 to 1.0 pound per 100 square feet). |
| |
|
#316
|
| SELECTIVE HERBICIDE #1 |
| BROADLEAF WEED KILLER - NON-VOLATILE SALT OF 2,4-D |
| Type: Selective herbicide kills broadleaf plants without harming grasses. Water dilutable concentrate. Contain 25% 2,4-D dimethylamine salt (2 pounds per gallon acid equivalent).
Recommended for controlling arrowhead, dandelion, docks, henbit, goldenrod, lambs-quarter, mustard, peppergrass, pigweed, plantains, ragweed, shepherd’s-purse, thistles, wild morning glory, wild radish, and many other 2,4-D-susceptible broad-leaf weeds. For use on lawns, parks, ornamental turf, and golf course fairways without injury to most grasses, apply 2 to 3 quarts per acre in sufficient water to obtain uniform coverage. DO NOT apply to bent grasses or to freshly seeded turf until grasses have become well established. For small areas, use one tablespoon in 1 1/2 gallons of water. To control broadleaf weeds along roadsides, vacant lots, in pastures, meadows, and rangelands, use 2 to 3 quarts per acre. Do not graze treated areas by dairy animals within seven days after treatment. |
| |
|
#350
|
| SELECTIVE HERBICIDE #3 |
| BROADLEAF WEED BRUSH, AND STUMP KILLER |
| Type: Selective herbicide kills broadleaf weeds, brush, and stumps. Water dilutable concentrate. Contains 31.9% nonvolatile amine salts of 2,4-D.
This premium non-volatile 2,4-D formulation provides the greatest margin of safety while it effectively kills stubborn broadleaf weeds and brush. For lawns, fairways, and greens, use 2 quarts per acre (temporary yellowing may occur on Bentgrass or Fescue). To kill woody brush such as poison oak, brambles, poison ivy, sumac, and honeysuckle, use 8 ounces per gallon of water and drench plants thoroughly when they are in full leaf.
To kill stumps, mix 1 pint in one quart of kerosene or diesel fuel and apply to all areas of the stump. |
| |
|
#360
|
|
